More Images
High Energy Centrifugal Disc Units TT A/2C
International Surface Preparation features the Walther Trowal Turbotron A/2C Systems.
The rotating spinner (60 – 250 rpm) accelerates the mass of work pieces, media and compound to the wall of the stationary work bowl and pushes the mass upwards along the wall of the work bowl. With decreasing acceleration and increasing gravity, the mass slides back down to the spinner where it is again accelerated.
Features of the Walther Turbotron centrifugal disc machines:
- Optimum dynamic geometry of spinner and work bowl
- Infinite water level control
- Infinitely adjustable speed of the spinner
- Automatic gap control (on some models) can be adjusted within a tolerance of 0.01 mm
- Rinsing of the gap prevents premature wear of spinner and work bowl
- Anti-blocking system prevents "seizure" of the spinner
- Additional protection of spinner and work bowl by temperature control in the gap area
The A/2C systems are double batch systems. While one batch with finished parts is separated on the screening machine a second batch is in process in the work bowl. The A/2C idle time is minimized specifically with regard to parts / media separation and productivity is optimized. These double batch systems are ideally suited for automation.
The A/2C can also be configured in a tandem system. This version of the double batch system is well suited for applications with a relatively long processing time and short screening or separation times. The tandem systems have two work bowls but only one intermediate hopper and screening machine. The combined intermediate hopper and screening machine is used alternatively by the two work bowls. This provides a significant advantage in cost and space requirements.
International Surface Preparation offers these five models of Walther Trowal Turbotron A/2C systems:
| Machine types | TT60 A/2C | TT90 A/2C | TT140 A/2C | TT280 A/2C | TT520 A/2C |
|---|---|---|---|---|---|
| Gross Volume (cf) | 2.1 | 3.1 | 4.9 | 9.8 | 18.3 |
| Working Capacity (cf) | 1.4 | 2.1 | 3.5 | 7.0 | 14.1 |
| Work Bowl Material | Steel / PU | Steel / PU | Steel / PU | Steel / PU | Steel / PU |
| Spinning Power (hp) | 5.3 | 5.3 | 14.7 | 14.7 | 40.2 |
| Max RPM @ 50 Hz | 213 | 213 | 173 | 179 | 165 |
| Screening Area (si) | 852 | 852 | 852 | 1472 | 1472 |
International Surface Preparation can assist you with the proper selection of mass finishing equipment that best fits your processing and production requirements. Click here to contact International Surface Preparation.